Skip to main content

Here's how 3D printing is changing photography

[ad_1]


It seems these days there are few industries unchanged by 3D printing. The technology is being used to make advanced running shoes, to prototype new product designs and to make healthcare cheaper. It’s influencing the photography world, too—especially those pockets interested in analog techniques and DIY projects.



There are now several cameras to excite film photographers that use elements of 3D printing. The cardboard PinBox from Hamm Camera Company incorporates 3D printed film spools. Then there’s the Goodman One, an open-source camera designed by Dora Goodman and offered for free download via her website. And of course there are Kickstarter camera projects like the Standard Camera and Cameradactyl, which are are slinging 3D printed 4x5 film cameras that are affordable and lightweight, thereby making the format more accessible.


The use of 3D printing is reinvigorating the analogue camera community. This new technology is breathing life into old camera designs for two reasons: one, 3D printing is much cheaper than injection molding and two, it allows for quick prototyping. The method makes it cheaper and easier for camera designers to tinker and for more photographers to try their hand at shooting analogue formats.


The Standard Camera, which was created by photographer Drew Nikonowicz, is a 4x5 view camera that you can make yourself. It’s available via Kickstarter for $320 (or $350 if the idea of building your own makes your head spin). Nikonowicz, an Aperture Portfolio-prize-winning photographer who primarily works in large format, began designing his 3D printed 4x5 camera while he was still in college.


“The 4x5 was born out of a genuine excitement of photography and making things,” he says. “But I was also thinking ahead to when I graduated and I wouldn’t have access to the school’s equipment anymore.”



The majority of the elements on the Standard Camera are 3D printed in Nikonowicz’s studio. "If you are looking at the camera all of the parts that are black are 3D printed,” he says.


The standard forks, which hold the body of the camera, are made of aluminum. The bellows, which allow the lens to be moved back and forth for focusing, are made of fabric and crafted in house. He plans to outsource the ground glass (where you can see the image that the camera is about to capture) for cameras purchased by Kickstarter backers. He says he plans to use the money raised from Kickstarter to buy more 3D printers so he can increase his throughput—right now he can make one camera in two days (“Unless I don’t sleep, in which case I can do it in one day.”) He would like to start being able to print at least two cameras per day.



“The entire camera to some degree is in a perpetual state of change,” he says. “There are little tweaks to be had everywhere and I’m constantly getting feedback and constantly improving the camera.”


Eventually he’d like to make his design open-source and thinks that the Standard could be used by educational institutions and in workshop settings.



“A lot of photo programs want to teach large format but they can’t afford to,” he says. “I’m really hoping to work with those universities to kit them up with as many cameras as they need.”


While Nikonowicz’s camera looks like a standard traditional camera, one of the fun elements of 3D printing is the ability to make things that are anything but traditional. Meet Cameradactyl, a 3D printed 4x5 camera created by Evan Moses, which comes in a customizable bright colors.



With a $225 pledge on Kickstarter, Cameradactyl backers will get a fully assembled camera with custom colors (it’s a bit like designing your own pair of Vans).


“I wanted to make the cheapest 4x5 and in keeping with that theme I just started buying the cheapest filament that I could find on Amazon,” says Moses. At first the cheapest filament was hot pink. When he ran out, baby blue was on sale. “It started out looking like a Barbie dream cam, then it got more green, then there was some yellow. I loved how wacky it was. I thought it was fun. It’s like a toy, but it’s a toy that you can take professional pictures with that are indistinguishable from pictures taken on a $2000 4x5, because ultimately, it looks like whatever lens you put on it.”



Moses has been into photography his entire life, building 8x10s on the cheap in college before spending about half a decade driving across the country buying and selling photographic equipment. He initially purchased a 3D printer to work on a project that involved drafting PCB boards for a temperature alarm he was designing, but as he waited for processing chips to arrive, he found himself with idle hands.


“I’ve built cameras my whole life and I just couldn’t help myself,” he says.



A few days later he was printing screws and sliders and within a month he had shelved the initial electronic project and built his first Cameradactyl camera.


“It kind of took over my life,” he says. “It is really amazing that I can make a camera for myself and there are a couple hundred people all over the world who are also interested in it. It’s maybe not a good business decision to be making cameras that were designed in the 1800s on a 3D printer, but it’s so fun.”



Moses bought more 3D printers before launching his campaign, and estimates he spent a few thousand printing hours making one full camera in every color. He also prints pieces to improve his printers.


“I buy terrible printers and then run them for 10 hours printing pieces to improve them,” he explains. “In 15-20 hours I have one printer that works pretty well. Then I’m able to make shapes that I could never make before.” Right now he says he can make about one camera’s worth of plastic in a day, and says that printing, grinding glass and building bellows in batches makes things go a bit quicker and brings down the cost.



“I’m like the miniature Henry Ford of wacky camera toys,” he jokes.


Moses says he has already had a few backers reach out and tell him that the Cameradactyl will be their first 4x5. He’d like to try to eventually make an 8x10 3D printed camera, a rangefinder, or an SLR.



“I think 3D printing and modern manufacturing technology is going to allow people to build toys and cameras that will perform just as well as a Leica or a Nikon with glass lenses and metal mechanical pieces,” Moses says.


Nikonowicz agrees, and says he typically prefers making he work with his Standard Camera over his Shen Hao field camera.


“There is less to juggle with the Standard,” he says. “I’m much more interested in photographs than cameras. I want to make a good camera, but your equipment should do its job and get out of your way.”


This article was originally featured on Popular Photography.




[ad_2]

Written By Jeanette D. Moses

Comments

Post a Comment

Popular posts from this blog

Ice technicians are the secret stars of the Winter Olympics

[ad_1] The emphasis of this year's two-week-long Winter Olympic Games has been placed squarely on the Olympians themselves. After all, the stated purpose of the international competition is to bring together the world’s greatest athletes in a nail-biting competition across fifteen different winter sports. But before the curlers, skiers, and skaters even arrived in Pyeongchang, South Korea, the Olympians of the ice technician world were already a few weeks deep in a competition of their own. Mark Callan of the World Curling Federation and Markus Aschauer of the International Bobsleigh and Skeleton Federation both say they’re hoping to make the best ice the Winter Olympics have ever seen. To transform the barren concrete jungle of existing tracks and arenas into an ice- and snow-covered wonderland is an enormous undertaking. And it takes a keen understanding of the physics and chemistry that keeps frozen precipitation pristine. Curling Callan has been making and maintaining ic...
Post a Comment
Read more

How to avoid the mid-movie bathroom break

[ad_1] Long movies and the urge to pee have been linked since the early days of cinema. Sixty-three years before Avengers: Endgame and its three-hour runtime, moviegoers settled in for nearly four hours of The Ten Commandments . “There will be an intermission,” director Cecil B. DeMille announced during the movie’s introduction. And audiences’ bladders were relieved. On average, movies aren’t getting longer, but they also don’t come with a predetermined bathroom break. That means when nature calls, you’ve got to either sit in growing discomfort or gamble on the best time to run to the restroom. But it doesn’t have to be this way, and for most people, setting your body to “do not disturb” is fairly simple. Go before the show The first piece of advice is also the easiest: pee before the movie starts. Generally, healthy adults urinate every 3-4 hours, so the longer a movie runs, the more urgent it becomes to reset your internal p...
Post a Comment
Read more

Charted: Here's how much your food waste hurts the environment

[ad_1] Our species is pretty good at wasting food. Some we discard at the farm for being undersized or oddly shaped. Others we allow to decay in their shipping containers, thrown away before they even reach shelves. We leave even more foodstuffs wasting away in grocery stores, often by letting it sit there until it reaches its sell-by date. As consumers, we don’t have much control over most of the process that brings our food to the grocery store, but we do have control over how much food we personally waste. Let's face it: We’ve all found liquified lettuce in our veggie drawers. Don't fret. It's arguably impossible to consume 100 percent of the food we buy. But a healthy reminder of the effect food waste has on the environment might help us all to be more conscious of the amount of food we eat—and don't eat. Consumer food waste varies extensively depending on the area. In South and Southeast Asia, the Food and Agriculture Organization (FAO) estimates that only around ...
Post a Comment
Read more